For consumers, investing in a solar system has never been easier but can still be troublesome if you don’t know exactly what you are looking for. With the help of government incentives and solar system providers setting up the entire system for you, getting solar panels on your roof these days is overall a pretty simple task.
There are so many solar panel providers in the Australian market today, you can find one here. So, you may not know where to begin. The first thing you should do is ask a friend or neighbour that has installed solar systems for their household which provider they used. They can also give you information on their experiences, problems and thoughts when it comes to their solar system. After gathering this information, you should also do some research online about the solar providers in your area and get quotes from them. South East Queensland is a large region and there are many providers within it.
Make sure the providers you want to get a quote for a solar system are a member of the Australian Clean Energy Council. If they are not members of the council, you will not be able to receive government subsidies when purchasing panels from them. Businesses who have accreditation with the Clean Energy Council will be guaranteed to employ electricians and experts who are specialised in setting up solar systems. Providers also must sell consumers quality solar systems and provide proper installation or else they will lose their membership.
Once you have asked a solar system provider for a quote they will send a team of verified solar experts and electricians to assess your property’s physical aspects and your current power supply and network. After the analysis is finished the provider usually recommends one or two solar systems that are tailored to your household. Getting quotes from two or three solar providers is a good idea, so you can make the right choice. Here is a list of three recommendations, so you can make the correct solar system purchase:
Lastly, remember that Queensland is a cyclone prone area. The mounting system for your panels needs to be very good quality and certified. Make sure your solar provider has certifications for the mounting system in the quote document before you make the purchase. The last thing you want is your solar panels being blown off your roof in a storm.
In pursuit to persuade more Australian households to install solar panels as a different energy source, the government is supplying major subsidies to households that are investing in a solar systems. The rebate amount a property owner receives depends upon the size of the solar system, the location of the property and the state of the energy market. A guarantee of a rebate has attracted many household owners and business owners to make a shift towards solar energy. Right here is where you can find more on information on making the switch to solar.
For residential properties, the current federal government offers what are known as Small-Scale Technology Certificates or STCs. These are rewards for properties that use renewable energy sources. So, when homeowners invest in an accredited solar power system they will receive STCs in accordance to the size of the system and the properties location.
The STCs are sold to organisations that generate electricity via fossil fuels by the homeowner or their renewable energy service provider. Therefore, residents will obtain an offset on the price on the installation of their solar system. However, the amount of the offset is hard to calculate and is not straightforward as prices can fluctuate due to supply and demand. The more STCs on the market, the less the offset will be. Less STCs on the market means the offset value is likely to be higher.
Additionally, the number of STCs the consumer receives depends on the location of their property. For this scheme, Australia is split into four “zone numbers”. If a residency is in a low zone number it means they will naturally get a great quantity of sunshine and consequently can claim more STCs. If a residency is within a high zone number it won’t receive many STCs. High zone number locations include Tasmania and Victoria, while low zone number locations include New South Wales and Queensland.
For homeowners to receive STCs the solar systems must be purchased and installed by government approved professionals.
Residencies may also be eligible for a feed-in tariff. This tariff is controlled by state governments. It forces electricity retailers to pay homeowners for the electricity sent into the grid that is produced by their solar system. Residential solar systems don’t store electricity, so the excess electricity that is not used by the homeowner is sent back to the electricity grid. The amount the homeowner receives depends on their baseload energy provider and the state in which they live. The size of the system and therefore the average cost will have an effect on this.
Moreover, this scheme allows homeowners to obtain “credit” through what is called “gross metering” and “net metering”
All the electricity produced by the solar panels is sent to the electrical grid. From there homeowners are given reimbursement for every kWh the system provides the grid.
The electricity produced by the solar panels is used by the household’s electrical equipment (such as lights, televisions, refrigerators). Any excess power produced that was not used by the household is sent to the electrical grid. The homeowner’s reimbursement depends on how much excess power was sent to the electrical grid.
In the past decade the price of installing solar systems on residential roofs are gradually falling in Australia. There are many factors for this. The Chinese economy is producing and exporting more panels which has increased the supply. These solar cells from China are more affordable for consumers and the increase in supply has reduced the price of obtaining solar panels.
Also, the government in recent years has offered massive subsidies to benefit residents who are installing solar panels for their household. This has caused what is known as “hypercompetition” and this has also reduced the price of installing solar cells significantly. Without these factors the price of solar panels would be very high and unaffordable for most Australians. Due to the affordability of renewable energy in Australia compared to all the other countries in the world, Australia has the highest rate of household installation of solar panels in the world.
The cost of a good quality 5kW solar system that has around 15 cells in Australia will cost anywhere around $4000 to $9000. Average quality 5Kw solar system may cost about $2500. Prices vary a lot when it comes to solar panels because there are numerous different types of panels that have a different system and quality. The other thing is you aren’t just paying for the panels, there are also additional costs involved as well. These additional costs include the mounting system and the balance of the system. The mounting system is what physically attaches the panels to your roof.
The mounting of the panels is important because they will need to withstand weather events such as hail, heavy rain and winds for at least twenty-five years. So, the mounting system needs to be high quality and resistant to corrosion as it will be exposed to rain water. For more information on getting a quote for installing solar click here.
Then there is the balance of the system or what is usually called the “BOS.” The BOS includes all the electrical parts of the solar system. These include the switches, wires, circuit breakers, cables and the most important part the inverter. The inverter is the most expensive part of the BOS components and can cost thousands of dollars. High quality BOS components are important for the solar system to work efficiently and safely.
The other additional cost is having a qualified electrician to come and do the instalment. The cost of labour depends on how difficult the solar system is to install in your household. Making sure your instalment is done by an experienced electrician ensures that your solar panels function to their full extent.
The cost of solar systems also depends where you live. For example a simple 5kW solar system costs you around $6,400 to install in Hobart, Tasmania. But the same solar system will cost around $4,500 in the Gold Coast, QLD. Therefore, it is important that consumers do their research to find out the prices of a solar system.
In Australia, electricity prices are rising, so it would make sense to save money on power where possible. There is now a great opportunity with a solar hot water system to manipulate the power bill in your favour and reduce the cost of living. Heating your water with a solar hot water system is a great alternative compared to the current ways most Aussies are heating their water. Below is a list of benefits of installing a solar hot water system.
The sun will continue to rise and set, it is very consistent. Although there are some cloudy days, there is always lots of sunshine, especially in the Sunshine Coast of Queensland. Therefore, solar power is a very reliable energy source and you will always have hot water throughout the sunny days of the year. In the event of a power outage there may not be any hot water readily available with a conventional hot water system. However, with a solar hot water system, it doesn’t matter if something goes wrong, there will always be hot water. Solar systems provide energy security and having hot water on demand in any sort of power outage or breaking down of equipment will make your neighbours jealous.
Although there is a large initial cost of purchase and instalment, in the long-term a solar hot water system will save you money. After instalment, if done properly, you won’t be paying money for hot water ever again. The best decision you ever made was investing in a hot water system that runs on solar power.
There has been plenty of research done over the past decade that suggests solar power doesn’t cause any damage to the environment and if it does it is very limited. Solar electricity is very “green” renewable energy and does not release any carbon dioxide or other “pollutants.” However, the extraction of Lithium and some other materials required to build solar systems is not a very “green” practice.
Solar panels present homeowners the ability to be energy independent. The sun which is the “fuel” for solar systems cannot be purchased or monopolised, it is free for everyone to use. Solar systems equate to an independent source of electricity that only you can own. Check out our solar Homepage for more information.
Those who live in the bush or further away from main power lines they can have trouble getting a cheap supply of electricity. They often only have one energy retailer to choose from. Therefore, these consumers in more rural settings must bow down to the demands of the single retailer or else they will be cut from the electricity grid. However, a great thing about the bush and the outback is that the sun shines a lot. So, a solar hot water system would be perfect for those in remote locations. You can check out more information on how to buy solar panels here.
Businesses in Australia that supply solar panels and solar system installations to consumers should be accredited by the Clean Energy Council. Businesses who have accreditation with the Clean Energy Council will be guaranteed to employ electricians and experts who are specialised in setting up solar systems. Consumers who want a guarantee that their solar system is installed properly should only do business with organisations accredited by the Clean Energy Council.
This is because retailers that are accredited by the council have signed up to what is named as the Solar PV Retailer Code of Conduct. This document holds organisations in the clean energy business accountable, making sure they provide consumers quality products and services. They must provide consumers with a quality product and proper installation or else they will lose their accreditation. Accredited solar system installers by the Clean Energy Council have proved that they sell solar systems that are good quality and function safely. They have also proved that their employers install solar systems properly.
It’s important to get accredited electricians to install a solar system as they can be very complicated and possibly dangerous to set up. You can find info on installers on this page. For solar systems to be advantageous or profitable to consumers they need to work at full efficiency for a numerous amount of years. Solar systems that are not installed properly won’t work at full efficiency and may not have any longevity. Therefore, if solar systems are not installed properly it will be disadvantageous to consumers to get solar panels in the first place.
Most businesses that sell solar panels in Australia to consumers have a team of experts. This is because every residence is different. When consumers purchase solar panels, businesses will usually send solar experts to analyse the physical aspects of their property and the property’s power supply and network. For this reason it's a good idea to understand how solar panels work.
For example, these experts will be analysing the size of the roof, roof shading, roof direction and the shape of the roof. They will also be analysing the consumers current power details, such as how much power is used, what time of the day it is used, the consumers position in the electricity market and how the house is connected to the baseload power grid. This analysis is done so that suppliers can provide the best possible solar system for the consumers property.
After the solar experts have scoped the property and analysed the property’s power supply and network, businesses will give a quote to the customer. They will then often get in touch with the residence’s baseload supplier to let them know that their customer is getting solar panels. This is so retailers can prepare for the property’s solar system installation. During installation the house will receive new wiring, circuit breakers, cables, an inverter and of course the solar panels. The installation process is costly but that is because setting up a solar system is a complicated process involving expensive electrical equipment.
Each solar panel is constructed with many smaller units which are called solar cells. In most types of solar panels, the solar cells are made from silicone. Silicone is known to be a “semi-conductor” and is one of the most abundant elements on Earth.
A solar cell is made up of crystal and silicone. The crystal and silicone is held together or “sandwiched” between conductive material such as aluminium. Each solar cell contains two different layers of silicone. One has extra electrons and the other one has extra holes for electrons. The extra electrons from one layer of silicone fill the holes of the other layer. Therefore, all the silicone atoms are connected by a strong bond, keeping the electrons steady. This also creates a positive charge on one side of the silicone and a negative on the other. The sunlight contains photons.
When one of the photons from the sun hits the solar cell, it knocks out one of the electrons leaving a hole. The knocked-out electron than navigates towards the positive charged side and the hole to the negative charged side. The knocked-out electron is then gathered and travels through the conductive material which acts as an external circuit and from there the electron can do electric work such as the powering of a light bulb. After the electron has done its electric work it returns to where it was knocked out via the other side of the external circuit. Each silicone cell only produces around 0.5 volts of power. However, you can connect many cells together and put them on a panel.
The electricity produced by the solar panel is then sent to an inverter. The electricity produced by the solar panel is DC electricity or Direct Current electricity. The inverter converts DC electricity to what is known as AC electricity or alternating current electricity. The AC electricity is then used to power your electrical products such as televisions, refrigerators and lights. Inverters do much more than convert electricity from DC to AC. They also can generate statistics about the solar panels, such as how much electricity was produced by the solar panels, what percentage of the households used electricity came from the solar panels and power point tracking. If you're need solar installed check out our homepage.
During the peak daylight hours, solar panels naturally produces more energy. If there is any excess energy it is sent into the baseload electricity grid. The customer will get credit when this excess electricity is sent back to the baseload grid. During cloudy days and at night time the customer can use these credits to get discounted electricity from the baseload grid. Check out more information on the solar rebate, to see if you're eligible.
Solar panels work best during the summer for the south east of Australia. Solar panels don’t produce that much electricity during the winter in Victoria and Tasmania. In the tropical parts of Australia, during the rainfall season solar panels produce little electricity but during the other times of the year they produce much more.